Warsaw Spire is a unique office project under development in Warsaw’s city centre. Created with the vision in which office space is harmoniously combined with a unique approach to modern urban space. The project lies at the epicenter of the capital, with modern office buildings and prestigious residential projects, as well as excellent transport, including trams, buses and a second metro line under construction.
The complex’s structural design solutions include a 180-metre high tower building (48 levels) and 2 lower buildings, each of 55 metres in height (15 levels). Together, they will provide approximately 100,000 m2 of office space equipped with the latest technical solutions. It’s the largest office development currently under construction in Europe.
With five levels of underground parking below the development, and foundations that reached a depth of 55 metres, the contractor had to come up with intelligent structural solutions and had to construct one of the deepest diaphragm walls in Poland. It required a high performance membrane to provide fully bonded waterproofing, zero water tracking, and exceptional concrete protection.
With the basement area subjected to 18 metres of hydrostatic water pressure, PREPRUFE® waterproofing membrane proved the ideal structural design solution, offering the perfect combination of outstanding water-tightness, proven performance and a simple application process. Its reliable, practical and unrivalled standards of below ground waterproofing protection made it the obvious choice.
More than 13,000 m2 of PREPRUFE® 300R membrane were specified to complete a comprehensive waterproofing system for the basement. Three separate structures with infill sections made detailing intricate for the basement considering the structures are to settle independently.
Designed with a proprietary adhesive layer, the ADVANCED BOND TECHNOLOGY™ enables concrete to aggressively adhere to the PREPRUFE® membrane, forming a unique seal which prevents any water migration between the waterproofing layer and the structure to substantially reduce the risk of leaks. As a result, potential breaches are localised to prevent water tracking between the waterproofing membrane and the structure.
Unlike other structural solutions, the PREPRUFE® waterproofing membrane does not rely upon hydration processes or swell in contact with water, and can withstand a 70m head of water, therefore it is truly waterproof. It remains sealed to the structure, regardless of the ground settling, and is lightweight, flexible and versatile.
It can also be applied on wet substrates or in extreme heat and is immediately ready without protective layers to receive rebar installation, proving to be more than five times faster to install than a traditional loose-laid PVC system.
Blue360sm Product Performance Advantage.
Because every project, large or small, deserves the best level of protection.
gcpat.in | India customer service: +91 124 4885900
GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA
GCP Applied Technologies India Private Limited, Unit No. 208, Second Floor, Time Tower Building, Sector-28, MG Road, Gurugram, Haryana-122002, India
This document is only current as of the last updated date stated below and is valid only for use in India. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.in. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2023-07-26